AGUILAR Y SALAS REACTOR , 316 STAINLESS STEEL, 7,060 LITERS, WITH AGITATION, HALF-COIL AND HEAT INSULATED

Industrial reactor manufactured by AGUILAR Y SALAS in 1992, with a total capacity of 7,060 liters, built in 316/316L stainless steel and equipped with an agitation system, a half-pipe for heat exchange and thermal insulation (heatproofing).

The equipment is designed to operate under pressure, with a body working pressure of 3 bar and a working temperature of up to 150 °C. It includes a half-pipe for heating or cooling the product by circulating a thermal fluid, with a volume of 250 liters, a working pressure of 6 bar, and a working temperature of 150 °C.

The agitation system incorporates a double-flow, three-bladed propeller, a baffle, and a mechanical seal to promote product mixing and homogenization. It is powered by a 4 kW, 1,420 rpm ATEX motor connected to a gearbox with a 24.48:1 reduction ratio, providing an agitator rotation speed of 58 rpm.

The reactor has a vertical configuration supported on brackets, with Klöpper-type upper and lower ends. It incorporates a 500 mm internal manhole located in the upper end to facilitate access to the interior of the equipment.

In addition, it has load cells that allow the weight of the product contained in the reactor to be controlled.

The reactor body has an internal diameter of 1,880 mm and a height of 2,000 mm, with a thickness of 8 mm. The upper bottom also has a thickness of 8 mm.

The equipment is prepared to work in ATEX conditions, under pressure and at high temperatures.

The overall dimensions for transport are 2,500 mm wide and 4,300 mm high, with a weight of 3,000 kg.

Used industrial reactor, available in its current condition and without documentation.