TRAMEGA 316 STAINLESS STEEL REACTOR , 5,000 LITERS, WITH AGITATION, HALF-COIL AND HEAT INSULATED

Industrial reactor manufactured by TRAMEGA in 1997, with a total capacity of 5,000 liters, built in 316/316L stainless steel and equipped with an anchor-type stirring system, a half-pipe for heat exchange and thermal insulation (heatproofing).

The equipment is designed to operate under vacuum, with a working body pressure of -1 bar and a working temperature of up to 130 °C. It features a half-pipe that allows for heating or cooling of the product through the circulation of a thermal fluid, facilitating temperature control during the process.

The agitation system incorporates an anchor-type agitator, current breaker and mechanical seal, designed to promote mixing and homogenization of the product.

It is powered by an ATEX motor of 5.5 kW and 1,430 rpm, connected to a reducer with a reduction ratio of 51.49:1, which provides a stirring speed of 27.77 rpm.

The reactor has a vertical configuration supported on brackets, with a Klöpper-type top and a conical bottom. It incorporates a 400 mm internal diameter manhole located in the top for easy access to the interior of the equipment, as well as a DN100 flanged bottom discharge.

In addition, it has load cells that allow the weight of the product contained in the reactor to be controlled.

The reactor body has an outer diameter of 1,500 mm and a height of 1,500 mm, with a thickness of 5 mm. The top bottom also has a thickness of 5 mm.

The equipment is prepared to work in ATEX conditions, under vacuum and at high temperatures.

The total height of the equipment for transport is 3,100 mm.

Used industrial reactor, available in its current condition and without documentation.